civil 3d

When you have no idea what to do with your written assignments, use a reliable paper writing service. Now you don’t need to worry about the deadlines, grades, or absence of ideas. Place an order on our site to get original papers for a low price.


Order a Similar Paper Order a Different Paper

Civil3D:

The files referenced below are in the Assignment 8 folder.

1. Open HW8_P1.dwg in Civil3D. Complete the following tasks.
(Filename format: YourLastName_HW8_P1)

Create sample lines along the Jordan Court alignment.

a. Make “Design” the sample line group name.

b. Sample line style: “Road Sample Line”

c. Sample line label style: “Section Name”

d. Only put a check in the box next to Jordan Court

e. On the Sample Line Tools toolbar, select the creation method “From Corridor
Stations.” Accept defaults.

2. Open HW8_P2.dwg in Civil3D. Complete the following tasks.
(Filename format: YourLastName_HW8_P2)

Create a cross-section view of station 13+25 on the right side of the drawing by clicking on the
sample line at that station.

a. Select alignment: “Jordan Court”

b. Sample line group name: “Design”

c. Sample line: “13+25”

d. Station: “13+25.00’”

e. Section view style: “Design”

3. Open HW8_P3.dwg in Civil3D. Complete the following tasks.
(Filename format: YourLastName_HW8_P3)

Create multiple cross-section views along the road by clicking on “Section views” -> “Create
multiple views”.

a. Sample line group name: “Section Sheets”

b. Placement options: “Draft”

4. Open HW8_P4.dwg in Civil3D.

Complete the following tasks.
(Filename format: YourLastName_HW8_P4)

a. Create a sewer pipe network from the green polyline along Jordan Court by clicking on “Pipe
network” -> “Create pipe network from object”.

a. Click on the green polyline and accept the current flow direction.

b. Network name: “Sanitary”

c. Network parts list: “Sanitary Sewer”

d. Surface name: “Road FG”

e. Alignment name: “Jordan Court”

f. Check the “erase existing entity” box.

b. Repeat the process for Madison Lane. Use a network name of “Sanitary-2”

c. Repeat the process for the Madison Lane cul-de-sac. Use a network name of “Sanitary-3”

5. Open HW8_P5.dwg in Civil3D. Complete the following tasks.
(Filename format: YourLastName_HW8_P5)

Create a stormwater pipe network along Jordan Court that discharges at a location across
Emerson Road through “Pipe network” -> “Pipe network creation tools”.

a. Network name: “Storm1”

b. Network parts list: “Storm Sewer”

c. Surface name: “Road FG”

d. Alignment name: “Jordan Court”

e. Click OK. Insert a curb inlet structure on Jordan Court at station 5+50.
i. Select the Rectangular Junction Structure NF -> Curb Inlet
ii. Select the concrete pipe -> 15 inch diameter

f. Turn off all object snapping except for Center snapping

g. Click on the center of the red circle to the east of station 5+50.

h. Click on the center of the red circle to the west of station 5+50.

i. Click on the center of the red circle to the south of station 2+40.42.

j. Change the pipe diameter now to 18 inch concrete pipe.

k. Click on the center of the red circle at station 2+40.42.

l. Insert a storm manhole structure.
i. Select the Cylindrical Junction Structure NF -> Storm Manhole
ii. Select the concrete pipe -> 24 inch diameter

m. Click on the center of the red circle located at the western corner of the Common
Area.

n. Insert a headwall structure.
i. Select the Concrete Rectangular Winged Headwall -> Winged Headwall for 24”

o. Click on the center of the red circle on the opposite side of Emerson Road

.

6. Complete Module 8 – Tutorial 1 – “Configuring Pipe Networks.” This problem shows you how to
create and edit the parts list for a pipe network.
(Filename format: YourLastName_HW8_P6)

Writerbay.net

Get help with your complex tasks from our writing experts. Kindly click on ORDER NOW to receive an A++ paper from our masters- and PhD writers.

Get a 15% discount on your order using the following coupon code SAVE15


Order a Similar Paper Order a Different Paper